Configure the Iron Bow vCLINiC
This topic provides an outline of the steps Iron Bow vCLINiC administrators should take to configure their Iron Bow vCLINiC using the VidyoRoom Admin UI.
Before you begin the configuration using the Admin UI, ensure that you have installed your vCLINiC according to the instructions in the Iron Bow vCLINiC Installation and User Guide (CLINiC-VC-10XIR-A01), which is available from the Iron Bow Downloads page, and that you have read About the Iron Bow vCLINiC.
To configure the vCLINiC, follow the steps in the table below. The first column in the table lists the general configuration step, the second column provides links to articles where you can get more specific steps and other detailed information, and the last column describes any additional information you need to know as a vCLINiC administrator.
|
Configuration step |
More info |
Information specific to vCLINiC |
|---|---|---|
|
Log in to the VidyoRoom Admin UI. |
Refer to Logging In in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section to log in for the first time using the default login credentials. |
|
Configure the account settings, including the VidyoPortal™ FQDN and your user name and password. |
Refer to Configuring the Account Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section as configuring the account settings is the same for VidyoRoom and vCLINiC. |
|
Configure the network settings. |
Refer to Configuring the Network Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section. |
|
Configure the WiFi settings. |
|
The vCLINiC supports WiFi with 802.11n and 802.11ac speeds, 2.4 GHz and 5 GHz bandwidth, and the WPA2 security protocol. If you want to use WiFi with your Iron Bow vCLINiC, you must first have a wired connection in order to reach the Admin UI. Once you have accessed the Admin UI, you can then use the steps in the section to configure WiFi for your vCLINiC. (To enable WiFi, click the 'Enable WiFi' option, then enter the SSID. Then, enter a password and click Save.) You must also ensure that the antennas are installed according to the Iron Bow vCLINiC Installation and User Guide. Lastly, if you change the WiFi configuration, the system will continue to remember the original setting. For example, if you initially set the WiFi network to Vidyo1 and then change it to vCLINiC1, the system remembers both and can connect to either (and you cannot delete the original setting). |
|
Configure the audio settings. |
Refer to Configuring the Audio Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section. |
|
Configure the advanced Phoenix settings. |
Refer to Configuring the Advanced Phoenix Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
Phoenix PowerHub or Quattro/Spider are optional |
|
Configure the video settings. |
Refer to Configuring the Video Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
Follow the steps as described in the section. Although not configured via the Settings > Video tab, the vCLINiC has a useful video feature called low-light mode (a.k.a., day/night mode) for vCLINiC users who use the standard VDO360 camera. To enable low-light mode, press the Manage button and then press *01 on the infrared remote control when you’re not in a call and not using the OnScreen UI. To disable low-light mode, press the Manage button and then press *02. For example, if you’re in a room with a patient, you may want to enable or disable this mode when the overhead lights in the room are turned on or off. |
|
Configure the content capturer. |
Refer to Configuring the Content Capturer in the VidyoConnect Room and VidyoRoom Administrator Guide. |
As a healthcare provider, you may be using the JEDMED Horus HD Digital Scope - Series 2 as the content share device with your vCLINiC. This device supports USB 1.1, is backward compatible, and can be connected to any USB port. Other providers may have the INOGENI built-in the vCLINiC for content share from other medical devices/computes using an HDMI cable. |
|
Configure preferences, such as Auto Answer, Join/Exit Tones, Screen Saver Timeout, and many more. |
Refer to Configuring Preferences in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section, but be aware that some preferences may not apply to vCLINiC, such as Enable HDMI-CEC, Phoenix Super Sensitive Mode, Button Press URL, and others. |
|
Configure the language and time zone. |
Refer to Configuring the Language and Time Zone in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section. |
|
Configure calendar integration. |
Refer to Configuring Calendar Integration in the VidyoConnect Room and VidyoRoom Administrator Guide. |
If you aren't using calendar integration, select the None radio button. Otherwise, follow the steps for Microsoft Exchange Calendar or Google Calendar as described in the section. |
|
Configure the remote control. |
Refer to Configuring the Remote Control Interface in the VidyoConnect Room and VidyoRoom Administrator Guide. See also Using the Infrared Remote Control in the VidyoConnect Room and VidyoControl Application User Guide and the Getting Started with VidyoRoom Remote Controls quick guides. |
The remote control will not work out-of-box and must be configured before use as described in the previous column. |
|
Design the display layout. |
Refer to Designing the Display Layout in the VidyoConnect Room and VidyoRoom Administrator Guide. |
Only a single screen is used so options are limited; however, the default option should work for all. |
|
Set the system time. |
Refer to Setting the System Time in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section. |
|
Configure the reboot maintenance schedule, (only if needed). |
Refer to Configuring the Reboot Maintenance Schedule in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section. |
|
Set the log levels, (only if needed). |
Refer to Setting the Log Levels and Accessing the Log Files in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section for setting the log levels. You can refer back to this section later if you need information about accessing log files. |
|
Configure your Internet Explorer settings, if needed. |
Refer to Configuring Internet Explorer Settings in the VidyoConnect Room and VidyoRoom Administrator Guide. |
Follow the steps in this section only if you are planning to access the VidyoRoom Admin UI via an Internet Explorer browser. |
|
Perform a firmware update, if needed. |
Refer to Performing the Firmware Update in the VidyoConnect Room and VidyoRoom Administrator Guide. |
If you need to perform a firmware update, you must upload the image using a wired connection. If you try to perform an image upload via WiFi, the upload may take a very long time and/or it may be interrupted, which would require you to restart the upload. For the vCLINiC, you must use the VidyoRoom SE (Software Edition) installer, which is available from the VidyoRoom Packages downloads page. To perform the update, either upload the VidyoRoom SE installer as described in the "Performing a Firmware Update" section or upload the VidyoRoom SE installer to the Portal client installer download page. Also, for the vCLINiC, the Write Protection Mode field does not appear on the Firmware tab. |
|
Upload a UI background, if desired. |
Refer to Uploading UI Backgrounds in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section if you want to upload a UI background. |
|
View the system statistics, if desired. |
Refer to Viewing the Statistics in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section if you want to view the statistics. |
|
Reset the Admin UI password, if needed or desired. |
Refer to Resetting the Password in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section if you want to reset the password. |
|
Use the Ping or TraceRoute network tools, if needed. |
Refer to "Using the Network Tools in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section if you need to use the Ping or TraceRoute network tools. |
|
View information about the Iron Bow vCLINiC, such as the version, model number, and image revision, if desired. |
Refer to Viewing the About Information in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section if you want to view information about the Iron Bow vCLINiC. |
|
Log out of the VidyoRoom Admin UI. |
Refer to Logging Out in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section when you want to log out of the VidyoRoom Admin UI. |
|
Shut down or restart the Iron Bow vCLINiC. |
Refer to Shutting Down in the VidyoConnect Room and VidyoRoom Administrator Guide. |
None. Follow the steps as described in the section when you want to shut down or restart the Iron Bow vCLINiC. |
