VidyoPortal VM provisioning requirements
VidyoPortal version 3.3 or later is available as a single Virtual Edition that dynamically enforces capacity limits based on the number of vCPU allocated. The default OVA has the resource reservations pre-configured for profile 1 below, but can be adjusted based on your individual needs.
The following configurations are the only supported configurations.
Note OVA is pre-configured for the below Usage Profile 1 for version 19.2.0.x. |
Usage Profile |
VidyoPortal capacity |
VM configuration |
Resource reservation |
Physical host |
|||
---|---|---|---|---|---|---|---|
vCPU (Cores) |
RAM (GB) |
Storage (GB) |
CPU (GHz) |
RAM (GB) |
Min. CPU speed (GHz) |
||
Usage Profile 1 |
10,000 Users; 1,000 Tenants |
4 |
12 |
100 |
8 |
8 |
3.0 |
Usage Profile 2 |
10,000 Users; 1,000 Tenants |
6 |
8 |
100 |
8 |
8 |
2.0 |
Usage Profile 3 |
1,000 Users; 100 Tenants |
2 |
8 |
100 |
2 |
8 |
2.0 |
VidyoPortal VE may be run together with VidyoRouter VE and/or VidyoGateway VE on the same physical host server for a low-cost solution.
Note VidyoPortal VE can be configured to use the Hot Standby software option. See Appendix E. Hot Standby in the VidyoPortal and VidyoRouter Administrator Guide. |